Page 1 of 1
Studio 2.0 error
Posted: Thu Mar 03, 2011 2:49 am
by STZoro
Hello men, i need your help.
I installed studio 2.0 in DarkReign2 folder, launched DR2 studio, but
it just shows strange picture like "Where's weily..." and crushes after 4-7 secs
with fatal error...
I don't understand, maybe someone had this error and maybe someone did
fixed it...If yes, then help if it's possible...Thank you!
(i have horrible English, and some words may be non-understanding)
Re: Studio 2.0 error
Posted: Thu Mar 03, 2011 3:53 am
by {EMC}Methuselah96
what is the fatal error?
did you use the dark reign 2 download i gave you?
Re: Studio 2.0 error
Posted: Thu Mar 03, 2011 4:06 am
by STZoro
Well, nope...
I downloaded from other site...
ProgrammFiles/Activision/Dark Reign 2...
(if my memory not lying to me)
Well, i try download Dark Reign 2 from URL from your video as
you told...
Re: Studio 2.0 error
Posted: Fri Mar 04, 2011 5:26 am
by STZoro
Well, how i can make objects and army and etc in Studio 2.0
Re: Studio 2.0 error
Posted: Fri Mar 04, 2011 7:45 am
by {EMC}x0m9k
i have an error too...
Var not setup for (MirrorAxes)
Re: Studio 2.0 error
Posted: Fri Mar 04, 2011 5:21 pm
by {EMC}Methuselah96
ok i might as well do it the easier way then making u download the other dr2
ok download these two and install them and it will work
make sure you install the first one first
if you ask where there is only a 1st and a 3rd patch
i dont feel like going into it
just trust me
http://www.mediafire.com/?py35asn0dd4cg6q
http://www.mediafire.com/?ufok154u571spyh
Re: Studio 2.0 error
Posted: Sat Mar 05, 2011 2:27 am
by STZoro
Why i have nothing in Objects: Army, Insects, Heroes, Resources and etc. are empty...
And what i should do with saved map in Studio 2.0 How to convert it to .X ?
Re: Studio 2.0 error
Posted: Sat Mar 05, 2011 5:45 am
by {EMC}Methuselah96
to add objects right now
you have to go into all objects
then add a dark reign 2 object
to the map
then when you exit out of dark reign 2
you have to go into objects.cfg
and change the name from whatever the dr2 name is
and change it to a amrts object
Re: Studio 2.0 error
Posted: Sat Mar 05, 2011 8:32 pm
by STZoro
Well, i still have two questions:
1.Where i can find the list of all AMRTS objects?
2.How to convert saved map from DR2 editor into AMRTS map?
Re: Studio 2.0 error
Posted: Sun Mar 06, 2011 4:26 am
by {EMC}Methuselah96
the names of the army are usually
either
army.unit.bulldozer (for units)
OR
army.building.aagun (for buildings)
for a complete list you would have to extract base.x
then go in objects\army\configs
and open those files in notepad
and where it says
CreateObjectType("army.building.aagun", "Unit")
army.building.aagun is the name of the building